Sunday, February 2, 2014

Scythesmith in town





 
Note:  Back in December I posted a link to a Serbian television program about a present-day blacksmith who is renowned for his scythe blades (the link was added to the post "Forge Your Own Scythe Blade" in the comments). Since then, I've found the same video on YouTube, as well as a related video and some more information that appears below.


A blacksmith named Ahmo Zonić makes scythe blades in the town of Mrkonjić Grad, in western Bosnia and Herzegovina. A Serbian television program shows him making a scythe blade:



Direct link to YouTube video here.
Alternate YouTube video (with full introduction for TV show) here.
Original link to Serbian TV show here.

The heat treatment of the blade is particularly interesting, and begins at approximately 10:30. After quenching in what looks like used motor oil (?), the blade is cleaned and then appears to be tempered progressively along its length over hot coals. Ahmo Zonić's son Nermin regulates the blade's temperature during this part of the tempering process by blowing air on it from a metal tube he holds in his mouth. 

The tempering process is claimed to be a secret that is passed down from father to son, and the heat treatment supposedly involves clay (?), wax, oil, badger and bear fat, and secret ingredients. The resulting scythe blades are said to be unbreakable.

Ahmo and Nermin Zonić are also featured in this shorter video:



 
The following photos are linked from their shop's website varcarka.com:




 


This blacksmith shop has a history dating back to the 16th century, according to documents found in their attic. Ahmo Zonić learned his trade from his father, and is passing it down to his son. They produce up to 150 scythe blades per year, in addition to other tools and wrought iron fences.





Sources:

http://varcarka.com/onama.html 
http://bs.wikipedia.org/wiki/Varcarka_%28kosa%29
Title photo linked from indeks.ba









Cykl "Polonia", III. Kucie kos by Artur Grottger, 1863













3 comments:

  1. I don't know if you have seen these two scythe forging films from Sweden (1920s):

    http://www.euscreen.eu/play.jsp?id=EUS_7C1E7708B4E24608B59797B401FE4C18
    http://www.euscreen.eu/play.jsp?id=EUS_5ABD20B8C63A4F59AA55B7C91F4E9036

    ReplyDelete
    Replies
    1. Thanks for the links. The smith in the first video uses a trip hammer. In the second video, the scythe blade is hammered only by hand.

      Delete
  2. A blacksmith friend of mine that doesn't use the internet or have no mail wonders if the Serbian blacksmith above have places for apprentices? He's well experienced, and have done blacksmithing for the past 30 years or so, and have made several scythes, etc, too.

    ReplyDelete